Safety Functions - Grizzly AKS 4035 Lion Original Instructions For Use

socket with an earth. Ensure
that the mains voltage match-
es the specifications on the
charger rating plate. Risk of
electric shock.
• Disconnect the charger from
the mains before closing or
opening connection to the
battery / power tool / device.
This ensures that the battery
and charger are not dam-
aged.
• Keep the charger clean and
awayfrom wet and rain. Do
not use the charger outdoors.
Dirt and the entry of water
increase the risk of electric
shock.
• Operate the charger only
with the appropriate original
batteries. Char ing other bat-
teries may result in injuries
and risk of fire
• Avoid mechanical damage to
the charger. This can result in
internal short circuits.
Do not operate the charger
•
on a combustible surface
(e.g. paper, textiles). Risk of
fire due to heating during
char ging.
• If the power cable for this
equipment is damaged, it
must be replaced by the man-
ufacturer, a customer service
agent of the same or a simi-
larly qualified person in order
to prevent hazards.
• Do not use the charger to charge
non-rechargeable batteries.
RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by swing-
ing your hands and arms when operating
the appliance for longer periods of time
or if the unit is not held or maintained
properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.

Safety functions

A 1 Rear grip with hand guard (16) B C
Protects the hand against branch-
es and boughs in the case of
K L M
springing away by the chain.
3 Chain braking lever/hand guard
Control system, which stops the
U V W
saw chain immediately in case of
a spring-back; lever can also be
activated manually; protects the
left hand of the operator if it slides
from the front grip.
5 Saw chain with small spring-
back
helps you to catch spring-backs
with specially developed control
systems.
GB
D E F
N O P
X Y Z
97
G H
Q R