Notes On Safety; Symbols - Grizzly AKS 4035 Lion Original Instructions For Use

GB
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the oper-
ating cycle are to be taken into ac-
count in this (for example times in
which the electric tool is turned off
and those in which even though it is
turned on, it is not running under a
load).
90

Notes on safety

This section deals with the basic safety
regulations while working with the chain-
saw.
Before working with the chainsaw,
familiarise yourself with all the con-
trols. Practise handling the saw (by
cutting logs to size on a sawhorse)
and have the functionality, mode of
action, sawing techniques and per-
sonal safety equipment explained
to you by an experienced user or
an expert.

Symbols

Symbols used on the saw
A chainsaw is a dangerous de-
vice, which can cause serious or
even fatal injuries with incorrect or
careless use. Thus, for your own
safety and the safety of others, you
should always take note of the in-
structions on safety and, in case of
difficulties, consult a specialist for
advice.
Read and take note of the operat-
ing manual belonging to the ma-
chine
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face pro-
tection, safety helmet,
tion
working clothes
Use protective clothing
Wear cut-protection gloves
cut-protec-
and ear protection