Correct Handling Of The Battery Charger; Safety Functions - Grizzly AKS 2440 Lion Set Translation Of The Original Instructions For Use

CORRECT HANDLING OF
THE BATTERY CHARGER
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of ex-
peri nce and knowledge if they
have been given supervision
or instruction concerning use
of the appliance in a safe way
and understand the hazards
involved. Children shall not play
with the appliance. Cleaning
and user maintenance shall not
be made by children without su-
pervision.
To charge the battery, use
•
only the charger supplied.
Risk of fire and explosion.
This ensures that the safety
of the device is maintained.
• Before each use, check the
charger,cable and plug and
have them repaired by quali-
fied professionals and only
with original parts. Do not
use a defective charger and
do not open it up yourself.
This ensures that the safety
of the device is maintained.
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications
on the charger rating plate.
Risk of electric shock.
• Disconnect the charger from
the mains before closing or
opening connection to the
battery / power tool / device.
This ensures that the battery
and charger are not damaged.
• Keep the charger clean and
awayfrom wet and rain. Do
not use the charger out-
doors. Dirt and the entry of
water increase the risk of
electric shock.
• Operate the charger only
with the appropriate original
batteries. Char ing other bat-
teries may result in injuries
and risk of fire
• Avoid mechanical damage to
the charger. This can result
in internal short circuits.
Do not operate the charger on
•
a combustible surface (e.g. pa-
per, textiles). Risk of fire due
to heating during char ging.
• If the power cable for this
equipment is damaged, it
must be replaced by the
manufacturer, a customer
service agent of the same or
a similarly qualified person
in order to prevent hazards.

Safety functions

A 1 Rear grip with hand guard
(16)
Protects the hand against
branches and boughs in the
case of springing away by the
chain.
3 Chain braking lever/hand
guard
Control system, which stops the
saw chain immediately in case
of a spring-back; lever can also
be activated manually; protects
the left hand of the operator if it
slides from the front grip.
GB
151