Storage; Waste Disposal And Environmental Protection - Grizzly AKS 4035 Lion Original Instructions For Use

tery from the device (
2. Remove the sprocket chain wheel
covering (
and the chain bar (
3. Check the chain bar (4) for wear. Re-
move burrs and straighten the guide
surfaces with a flat file.
4. Clean the oil passages (
A B C D E
the chain bar, in order to guarantee
K L M N O
a trouble-free, automatic oiling of the
U V saw chain during operation. W X Y
5. Mount chain bar (
( 5) and sprocket chain wheel cover-
ing ( 15) and tighten the chainsaw.
With the oil nozzles in good condi-
tion and the oil regulator set cor-
rectly, the saw chain will spray a
little oil off after starting.
The blade (4) must be inverted every 8-10
working hours in order to guarantee even
B C D
wear.
If the blade (4) is turned around, the ten-
sioning screw (23) must be re-fitted to the
L M N
other side of the blade:
V W X
1. Remove the chain wheel cover
( 15), the sawing chain (
and the blade (
2. Release the fixing screw (
which connects the blade (
to the tensioning screw (
3. Position the tensioning screw
( 23) on the other side of the
blade and re-tighten the fixing
screw (
The round lug (
sioning screw must point towards
the chain sprocket.
4. Assemble the blade (
sawing chain (
wheel cover (
the sawing chain.
19).
15), the saw chain (
4).
26), of
F G H I J
P Q R S T
Z
4), chainsaw
E F
O P
Y Z
4).
23a).
23b) of the ten-
4), the
5) and the chain
15) and tension

Storage

5) • Clean the equipment before putting it
away.
• Empty the oil tank before longer peri-
ods of non-use. Dispose of waste oil
environmentally correctly (see „Waste
disposal and environmental protection").
• Put on saw bar protection sheath.
• Store the appliance in a dry place well
out of reach of children
• Before a longer period of storage (e.g.
over winter), remove the battery from
the equipment.
• Only keep the batteries partly charged.
The charge condition should be 40-
60% during a longer storage period.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months
• Store the equipment between 10°C
G H I
and 25°C. Avoid extremes of cold and
heat during storage, in order to prevent
impairment of battery performance.
Q R S
Waste disposal and
environmental protection
5)
Remove the battery from the device and
23a), take the device, battery, accessories and
4) packaging for environmentally friendly
23). recycling.
Machines do not belong with do-
mestic waste.
Do not dispose of batteries in
household waste, fire (risk of explo-
sion) or water. Damaged batteries
may damage the environment and
your health if toxic fumes or liquids
leak out.
J
T
GB
109