Table of Contents
Advertisement
Available languages
Available languages
UK
sively upon the safety devices built into your
saw. As a chain saw user, you should take
several steps to keep your cutting jobs free
from accident or injury.
Kickback is the result of tool misuse and/
or incorrect operating procedures or
conditions and can be avoided by taking
proper precautions as given below:
a)
Maintain a firm grip, with thumbs
and fingers encircling the chain saw
handles, with both hands on the saw
and position your body and arm to
allow you to resist kickback forces.
Kickback forces can be controlled by the
operator, if proper precautions are taken.
Do not let go of the chain saw
b)
Do not overreach and do not cut
above shoulder height. This helps pre-
vent unintended tip contact and enables
better control of the chain saw in unex-
pected
situations..
Only use replacement bars and
c)
chains specified by the manufac-
turer. Incorrect replacement bars and
chains may cause chain breakage and/
or kickback.
d)
Follow the manufacturer´s sharpen-
ing and maintenance instructions
for the saw chain. Decreasing the
depth gauge height can lead to in-
creased kickback.
General description
Function description
The chainsaw is driven by an electric mo-
tor.
The circulating chain is led around a
saw bar (guide rail)
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
144
user.
Refer to the following descriptions for the
function of control elements.
The diagrams for the operation of the
device can be found on pages 2 + 3.
Overview
1 Rear handle
2 Oil filler cap
3 Oil tank cap
4 Chain brake
guard
5
Chain bar (Guide rail)
6
Saw chain
7 Nose sprocket
8 Bumper
9 Front handle
10 Electric motor
11 On/off switch
12 Safety lock
13 Chain catcher
14 Chain adjustment ring
15 Safety bolt
16 Sprocket chain wheel covering
17 Rear hand guard
18 Cable holder
19 Mains cable
20 Saw bar protection sheath
Safety functions
1
Rear grip with hand guard
Protects the hand against branch-
es and boughs in the case of
springing away by the
4
Chain braking lever/hand guard
Control system, which stops the
saw chain immediately in case
of a spring-back; lever can also
be activated manually; protects
the left hand of the operator if it
slides from the front
6
Saw chain with small spring-
handle, front hand
chain.
grip.
Advertisement
Chapters
Table of Contents
