axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de CONTENTS Safety requirements ..................................2 Purpose ........................................ 4 Delivery set ......................................4 Designation key ....................................4 Technical data ....................................5 Unit design and operating principle ..........................10 Mounting and set-up ..................................
Page 3
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de • Do not change the power cable length at your own discretion. • Do not bend the power cable. • Do not lay the power cable of the unit in •...
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de PURPOSE THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE TRAINING. THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER THE APPROPRIATE BRIEFING.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de TECHNICAL DATA The corrosive aggressiveness of the handled medium to carbon steels of ordinary quality must be equal to that of air at temperatures ranging from -25 °C to +40/60 °C.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de UNIT DESIGN AND OPERATING PRINCIPLE Axis-Q Axis-QR fans consist of a casing 1 with a square or a round flange with a grille fixed with bolts 4 and complete with an electric motor and impeller 5.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de Tubo-F, Tubo-M(Z), Tubo-MA(Z) fans The brackets 2 are attached to the casing with bolts 1. The electric motor with the impeller 4 is mounted on the bracket 3 inside the Tubo-F casing.
Page 14
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de Axis-F fan installation The fans are installed into air ducts by means of connection flanges. The fan must be installed in such a way so that the direction of the arrow shown on the casing matches the direction of air flow in the system.
Page 15
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de Tubo-M(Z) fan installation RSM(Z) The fans are installed into air duct by means of an reducer which enables joining different diameter ducts. Once done, the Tubo-M(Z) assembly is secured with clamps.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de CONNECTION TO POWER MAINS DISCONNECT THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT. CONNECTION OF THE UNIT TO POWER MAINS IS ALLOWED BY A QUALIFIED ELECTRICIAN WITH A WORK PERMIT FOR THE ELECTRIC UNITS UP TO 1000 V AFTER CAREFUL READING OF THE PRESENT USER’S MANUAL.
Page 17
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de Axis-Q and Axis-QR fan connection Axis-QA fan connection...
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de TECHNICAL MAINTENANCE DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! All the operations specific to the technical maintenance must be performed upon disconnecting the fan from power mains. The technical maintenance includes periodic cleaning of the fan surfaces from dust and dirt.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de TROUBLESHOOTING PROBLEM POSSIBLE REASONS TROUBLESHOOTING Check the electrical connections and the power No electric power. switch status. The fan will not start on power-up. Switch off the fan.
axis-Q / axis-Qr / axis-f / axis-Qa / axis-Qra / tubo-f / tubo-M(Z) / tubo-Ma(Z) www.blaubergventilatoren.de MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC.
Need help?
Do you have a question about the Axis-Q Series and is the answer not in the manual?
Questions and answers