Auto focus: When the buttons are clicked, the auto focus function starts to automatically adjust focus based
on a subject located in the center of the screen.
reset: Returns to the automatic adjustment position set in step 1 the basic installation settings. (page 23)
If not set, returns to the default position.
Note
•
Because the
focus is not changing. To adjust the focus in larger amounts, click and hold the buttons.
IMPORTANT
•
In the following locations or with the following subjects, the focus may not be able to be automatically
adjusted. In this case, manually adjust the focus.
–
when the subject moves a lot
–
when there are large changes to the lighting intensity
–
when the light level is low
–
when the subject or location is extremely bright or reflective
–
when viewing through windows
–
when the dome cover is in a location where it can easily become dirty
–
locations where there is not much contrast such as a white wall
–
when there is harsh flickering
or
only slightly adjusts the focus each time they are clicked, it may appear that
2 Settings
Operating Instructions
47