Panasonic WV-X5550LT Operating Instructions Manual page 38

2 Settings
If you move the slider in the "+" direction, the effect of back light compensation will increase.
If you move the slider in the "-" direction, the effect of back light compensation will decrease.
Click the [Reset] button to reset to the default setting.
•
Default: 16
[HLC level]
Adjust the high light compensation level.
If you move the slider in the "+" direction, the effect of high light compensation (HLC) will increase.
If you move the slider in the "-" direction, the effect of high light compensation (HLC) will decrease.
Click the [Reset] button to reset to the default setting.
•
Default: 16
[Mask area]
When mask area is set, the selected area is masked and you can adjust brightness.
Refer to page 43 for information on how to set the mask area.
Light control mode
[Light control mode]
Select the light control mode from the following.
•
Outdoor scene: Depending on the brightness level (illuminance), the iris will automatically be controlled
together with the shutter speed adjustment to control light. When shooting a bright subject such as outdoor,
etc., select this parameter. Be aware that flicker may occur when a subject is under fluorescent lighting.
•
Fix shutter: "On"
When "Dual sources [4:3](15fps mode)" or "Single source [4:3](30fps mode)" is selected for "Image capture
mode": 1/30 Fix, 1/60 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix, 1/1500 Fix, 1/2000 Fix, 1/3000 Fix,
1/4000 Fix, 1/10000 Fix
When "Dual sources [4:3](12.5fps mode)" or "Single source [4:3](25fps mode)" is selected for "Image
capture mode": 1/25 Fix, 1/50 Fix, 1/100 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix, 1/1500 Fix, 1/2000 Fix,
1/3000 Fix, 1/4000 Fix, 1/10000 Fix
•
Default: Outdoor scene
Note
•
When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object
with less blur.
•
When a faster shutter speed is selected, the sensitivity will become lower.
[Brightness]
Adjust the brightness.
If you move the slider in the "+" direction, the image will become brighter.
If you move the slider in the "-" direction, the image will become darker.
Click the [Reset] button to reset to the default brightness setting.
38 Operating Instructions