About The "Live" Page - Panasonic WV-X5550LT Operating Instructions Manual

1 Operations

1.1.3 About the "Live" page

Note
•
The buttons and setting items displayed on the "Live" page can be changed depending on the user
rights of the accessing user. You can set the user right settings from "User auth." under "User mng.".
(®page 52)
B
C
D
E
F
G
[Login] button
This button is displayed when "User auth." is "On" and a person other than the administrator logs in, or
when "User auth." is "Off" and "Guest User" is set to "Use". (®page 52)
Even in the above case, the [Login] button will not be displayed if "Host auth." is set to "On", and the camera
browser is opened from a host with administrator rights.
①
If login fails, close all the browsers, open the "Live" page and login once again.
[Setup] button
Displays the setup menu.
Display source selection
You can select the source to display in the main area.
•
Dual: Displays 2 screens with images from both Source1 and Source2.
•
1: Displays images from Source1.
•
2: Displays images from Source2.
[Live view] pull-down menu
You can select and switch to the image to be displayed in the main area from the following:
When "Dual" is selected: Stream(2)/JPEG(2)
When "1" or "2" is selected: Stream(1)/Stream(2)/JPEG(1)
The image in the main area is displayed based on the contents set in Stream(1) – (2) (®page 32),
JPEG(1) (®page 30). Also, the initial stream displayed when the camera is accessed can be set in "Initial
display stream" of the [Image] tab.
12 Operating Instructions
H
*1
I J
K