Aqua Lung PHODS Technical Manual page 18

18
PART #
102954
102952
054211
108318
102908
102955
102928
103044
TEST
Leak Test
MP
Opening Effort
TABLE 5: RECOMMENDED CLEANERS AND LUBRICANTS
LUBRICANT/CLEANER
Christo-Lube MCG-111
®
Oakite #31
White distilled vinegar
Oxygen compatible solution
Non-ionic Liquid dishwashing detergent
(diluted with warm water)
TABLE 3: TORQUE SPECIFICATIONS
DESCRIPTION / KEY ITEM #
First Stage Body (8)
QD Connector (9)
Safety Plug (10)
Bonnet (18)
Fill Port (29)
Dial Indicator (30)
OPC Inlet Fitting (36)
OPC 6 mm Outlet Connector (39)
TABLE 4: TEST BENCH SPECIFICATIONS
CONDITION
Inlet 2100 psi / 145 BAR
Inlet 2100 psi / 145 BAR
Inlet 2100 psi / 145 BAR
APPLICATION
All o-rings
CAUTION: Silicone rubber requires no lubrication or preservative treatment. DO
NOT apply grease or spray to silicone rubber parts. Doing so may cause a chemical
breakdown and premature deterioration of the material.
Acid bath for reusable stainless steel and
brass parts.
Acid bath for reusable stainless steel
and brass parts.
CAUTION: Do not use muriatic acid for the cleaning of any parts. Even if strongly
diluted, muriatic acid can harm chrome plating and may leave a residue that is
harmful to o-ring seals and other parts.
O2 Cleaning
Degreaser for brass and stainless steel
parts; general cleaning solution for plastic
and rubber.
TORQUE
25 ft lb / 33.9 Nm
60 in lb / 6.8 Nm, lever up
90 in lb / 10.2 Nm
90 in lb / 10.2 Nm
120 in lb / 13.5 Nm
90 in lb / 10.2 Nm
17 in lb / 1.9 Nm
17 in lb / 1.9 Nm
SPECIFICATION
No leaks allowed
15 - 35 psi / 1 - 2.4 BAR
0.5 inches H20 16.93 mbar
SOURCE
Aqua Lung, PN 820466, or
Lubrication Technologies
310 Morton Street
Jackson, OH 45640
(800) 477-8704
Oakite Products, Inc.
50 Valley Road
Berkeley Heights, NJ 07922
"Household" grade
As per training
"Household" grade
PHODS Technical Manual