Otto Bock Myo Plus Quick Manual page 2

Step 5: Check connectivity of App and
pattern function
- To test Bluetooth connectivity
The "Pattern Scaling Active" feature enlarges the size of
the patterns for easier viewing.
- Pattern Scaling Active
- Pattern Scaling In-Active
- Activate Pattern Scaling using
Step 6: Input data and create Test Set
Before recording data, the type of hand should be
designated:
- In the Main menu, click on
to electrodes and confirm all 8
are functioning, tap each set to
confirm that patterns are created
on the Spider Plot
the slider at bottom of Spider
Plot screen
"MyoCuff"
Choose either bebionic or
Myobock hand for the simulation
Click on "Basic Set" in the Main menu
- If training for powered rotation,
- Choose left or right limb
- Indicate the number of electrode
- Select pause time between
The test set consists of two recordings in the 90 degree
bent arm position – by clicking on the green arrow the
recording page is displayed.
In each recording, five movement patterns must
be performed in order: Relax, open, close, supinate,
pronate.
- Press the
- During the blue phase, the limb
- During the red phase, the limb
- The contraction strength should
activate the rotation slider
pairs being used by adjusting
the slider; 8 is default
recording sets; 4 seconds is
default
button to begin
recording
should be relaxed
should be creating the desired
motion (except in the first
recording of relaxation state)
be 0% at the beginning of
the red phase and should be
continuously increased to 80%
of maximum contraction strength
towards the end