Configure The Next Handset To The Base Station; Setting Handset Features; Ring Type - Nortel T7406 Installation Manual

If you are assigning the first handset to a new base station (which has
no security code), continue with the following steps:
9. The display shows
send the security code to the base station.
The display shows
10. Unplug the AC power adapter connected to the base station, and
plug it back in again.
11. Within 15 seconds, press and hold the
This sends the Security Code to the base station. The display
shows
successful.
Note: If the Security Code transfer fails, the display shows
12. Press the Options button to exit the Option menu.
The display changes to show the date and time.

Configure the next handset to the base station

Configure the second and third handsets to the base station using these
procedures:
1. Follow the steps in
30. Ensure you enter a different handset ID number (1, 2, or 3)
for each handset you configure.
2. If you want to change the handset ID password, continue with the
steps in Changing the Handset ID Password
3. Once you have assigned a Handset ID #, continue with
the Security Code

Setting Handset Features

After you identify the handsets to the base station, you can set up the
handset features:

Ring Type

To assign the ring type:
and you hear a beep when the transfer is
To correct this, repeat steps 9 and 10.
Configuring the Handset ID Number
on page 32 up to and including step 8.
Setting Handset Features / 33
, press to get ready to
.
button for five seconds.
on page 31.
T7406 Installation Guide

on page
Assigning