Progres AgroBee-L Manual page 14

• Angle Angle of the current position with respect to the initial (0º) and central position
defined in the parameters. Clockwise angle
• Dist. Distance from the current point to the point defined as the centre
• Angle N. Angle of the initial position defined in parameters relative to geographic North
• Status If it is 'YES', the GNSS receiver is fixed and the measurement of the position is
correctly displayed. If it is '0', it indicates that the GNSS receiver cannot determine the
position
• Satelites Number of satellites in the constellation currently being viewed by the GNSS
receiver incorporated into the module
• Lat Latitude of the actual position of the module
• Lon Longitude of the actual position of the module
• EA analog input values in [mV] and 4-20mA format: 4mA=800mV and 20mA=4000mV. The
number next to EA indicates the sensor number.
• ED status of digital input. With a '1' indicating that the contact is closed and a '0,' that it is
open.
• SD status of digital outputs (latch valves). With a '1' indicating that the valve is open and a
'0,' that it is closed. The digit on the far right corresponds to output 1.
La primera pantalla muestra un ejemplo de lo que podemos visualizar. Y si pulsamos '1' de
nuevo, veremos la segunda pantalla.
From the controller, you can define a series of sensors, indicated in this table:
AgroBee-L 15 GNSS
Angle: 333.2º Dist.: 248.8 m
Angle N.: 55.1º Status: 1
Satellites: 9
Lat.: 041º 37' 46.08" North
Lon.: 001º 00' 23.81" East
No. Description
01 Angle respective to the initial point (clockwise)
02 Distance from the starting point.
03 Angle of the initial point respective to geographic north
04 Angle respect to the initial point (counter-clockwise)
05 Analog sensor reader 4-20mA S1
06 Analog sensor reader 4-20mA S2
14
· User's manual | AgroBee-L
AgroBee-L 15 GNSS
EA1: 963
EA2: 11963
ED: 1
SD: 01
Sensors (analog inputs)
Units
From 0.0 to 359.9º
From 0.0 to 3200.0 metres
From 0.0 to 359.9º
From 0.0 to 359.9º
Depending on the sensor
Depending on the sensor