Verathon Glidescope Go Operation & Maintenance Manual page 18

PROCEDURE 5. ATTACH THE BLADE OR BATON
The blade or video baton attaches to the monitor's connector arm. The monitor rotates on
the connector arm, allowing you to set a starting angle to begin the intubation.
It is recommended that you leave single‑use accessories in their packaging while connecting
the cable and that you do not remove it until you are ready to perform the procedure. This
helps ensure that the blade remains as clean as possible until you are ready to use it.
1. Align the arrow on the monitor with the arrow on the baton or single‑use blade,
and then insert the blade/baton connector fully into the connector port on the
blade or baton.
Alignment marks
12
0900‑4788 REV‑10