Verathon Glidescope Go Operation & Maintenance Manual page 17

PROCEDURE 4. INSERT THE VIDEO BATON INTO THE STAT (OPTIONAL)
If you are using a video baton and a GVL Stat, attach the Stat to the baton before you
connect the baton to the monitor.
1. Open the GVL Stat pouch, but do not remove the Stat from the packaging.
2. Ensure that the logo on the side of the baton and the logo on the side of the Stat
are aligned.
3. Slide the video baton into the GVL Stat until it clicks into place. Do not remove the
Stat from the pouch until you are ready to begin the intubation. This helps ensure
that the blade remains as clean as possible until you are ready to use it.
Note: Ensure that you do not insert the video baton backwards.
Correct
4. When you remove the GVL Stat from the packaging, visually inspect the Stat to
ensure that all exterior surfaces are free of unintended rough areas, sharp edges,
protrusions, or cracks.
5. If desired to provide additional anti‑fog benefits, you may apply Dexide Fred Lite to
the camera window on the Stat.
instructions.
* Compatibility has been demonstrated for up to one hour of continuous exposure on video batons and Stats.
Incorrect
Use the solution according to the manufacturer's
*
11
0900‑4788 REV‑10