Setting The Driver's Seat (Comfort Seat, Optional); Setting The Steering Wheel Position; Refuelling; Operation - Kärcher MIC 50 Manual

7.4 Setting the driver's seat (comfort seat,
optional)
DANGER
Danger of accident
Only adjust the driver's seat when the device is standing.
Headrest
1
Document storage
2
Lumbar support adjustment
3
Backrest inclination adjustment
4
Left arm rest height adjustment
5
Can be folded upwards for entry and exit to/from cab.
Seat heater switch
6
Seat belt
7
Height adjustment / driver's weight adjuster
8
Horizontal adjustment
9
Right arm rest height adjustment
10
Right arm rest side adjustment
11
Right arm rest longitudinal adjustment
12
Horizontal shock absorber
13
1. Adjust the driver's seat so that the pedals and steering
wheel are easily reached.
2. Bring the left arm rest to the desired position.
3. Bring the right arm rest to the desired position.
4. Adjust the driver's seat to suit the weight of the driver so
that vibration from road irregularities are minimised.
a Check the lock prior to travel commencement.
7.5

Setting the steering wheel position

DANGER
Danger of accident
Only adjust the position of the steering wheel when the de-
vice is standing.
70
Steering wheel inclination adjustment pedal
1
Steering wheel height adjustment locking lever
2
1. Release the height adjustment locking lever and set the
steering wheel to the desired height.
2. Lock the locking lever.
3. Press and hold the inclination adjustment pedal and set
the steering wheel to the desired inclination.
4. Release the pedal.
5. Check the locks prior to travel commencement.
7.6

Refuelling

DANGER
Risk of explosion
Do not refuel in confined spaces.
Do not smoke and avoid open flames.
Ensure that no fuel gets on hot surfaces.
1. Switch off the ignition.
2. Open the tank cap.
3. Fill with fuel.
Only the fuel specified in the operating instructions may
be used.
4. Wipe of any spilt fuel and close the tank cap.
8

Operation

DANGER
Danger of crushing
Make sure that no persons are present in the vicinity of the
articulated joint or vehicle during operation.
When using the vehicle for towing, make sure that no per-
sons are located during operation between vehicle and
trailer.
CAUTION
Risk of burns
Only use the vehicle if all panels are attached.
ATTENTION
Risk of damage due to overheated hydraulic oil or
overheated motor!
In case of excessive hydraulic oil temperature or an exces-
sive coolant temperature, set the motor speed to idle mode
(do not switch off the motor).
Perform the measures in the "Malfunctions" section
ATTENTION
Risk of damage due to missing lubrication
If the warning light for the oil pressure lights up during op-
eration, immediately move the vehicle out of the danger
zone, switch off the motor immediately and rectify the fault.
CAUTION
Reduced stability due to attachments
Adjust the driving style.
English