Mic 50 Multifunction Display; Warning Lights And Indicator Lamps; Mic 70 Multifunction Display / Display - Kärcher MIC 50 Manual

6.7

MIC 50 multifunction display

Parking light indicator lamp
1
High beam indicator lamp
2
Not used
3
Service display
4
Note
Lights up if the relevant maintenance is to be carried out
Fuel reserve warning light
5
Parking brake warning light actuated
6
Battery charging monitor warning light
7
Not used
8
Drive / error indicator warning light
9
Not used
10
Engine oil pressure warning light
11
Hydraulic oil temperature warning light (too low / too
12
high)
Air filter warning light
13
Warning light for drive hydraulic oil filter (Hydraulic oil fil-
14
ter clogged)
Not used
15
Indicator lamp for differential lock active
16
Indicator lamp for flasher
17
Indicator lamp for Tempomat activated
18
Operating hours counter
19
Engine speed
20
Fuel level indicator
21
Symbol: Turtle
22
Note
Display for transport mode slow
Symbol: Rabbit
23
Note
Display for transport mode fast
Engine coolant temperature
24

6.7.1 Warning lights and indicator lamps

WARNING
Risk of damage to vehicle
If a red warning light lights up, then you must take immedi-
ate measures to rectify the fault. Search for the next oppor-
tunity for safely stopping out of the moving traffic.
62
ATTENTION
If a yellow warning light lights up, then you must take
measures to rectify the fault as soon as possible.
Note
Green and blue indicator lamps indicate the current activi-
ties of the vehicle.
1. The significance of the warning lights that light up in the
event of a malfunction is described in chapter 14 Trou-
bleshooting guide .
6.8

MIC 70 multifunction display / display

The default display language is English, but the language
can be changed via the Settings menu, see chapter 6.8.3
Setting the language on MIC 70.
Multifunction display, adjustable in height
1
Display
2
Warning lights and indicator lamps
3
Note
Whilst the system is starting up, all the warning lights
and indicator lamps briefly light up. This can be used for
monitoring purposes, in order to check that the lights are
working correctly.
Function buttons
4
Lever for height adjustment
5
The function buttons are used for navigating, changing the
settings or for directly selecting a menu. This is visually
seen in the navigation display in the display.
In order to adjust the multifunction display in height, open
the lever and set to the required position.
6.8.1 Warning lights and indicator lamps
WARNING
Risk of damage to vehicle
If a red warning light lights up, then you must take immedi-
ate measures to rectify the fault. Search for the next oppor-
tunity for safely stopping out of the moving traffic.
ATTENTION
If a yellow warning light lights up, then you must take
measures to rectify the fault as soon as possible.
Note
Green and blue indicator lamps indicate the current activi-
ties of the vehicle.
1. The significance of the warning lights that light up in the
event of a malfunction is described in chapter 14 Trou-
bleshooting guide .
English