Centre Operating Console For Mic 70; Rear Operating Console For Mic 50 - Kärcher MIC 50 Manual

Locking enabling for shovel or fork in the optional front
11
loader attachment
Switch for bypassing floating position (PTO usable with-
12
out floating position)
ATTENTION
Only use with attachments that need this function!
Hazard warning switch
13
Hand throttle lever - preselection for engine speed
14
Switch 2: Switch for AUX green to grey or purple (only
15
in the MDC variant)
Switch 1: Switchover from AUX red to blue (only in the
16
MDC variant)
Selector switch for hydraulic PTO
Hydraulic PTO (80 l/min, front) activated
1
Hydraulic PTO (40 l/min, front) activated
2
Hydraulic PTO (40 l/min, front) and (40 l/min, rear) acti-
3
vated
Hydraulic PTO (40 l/min, rear) activated
4
Hydraulic PTO (80 l/min, rear) activated
5
The selector switch is used to activate the relevant con-
nection for the front and rear hydraulic PTO.

6.11.3Centre operating console for MIC 70

PTO on/off
1
Position 1: Switch on the PTO
Press the black knob and pull the button
PTO on/off
Position 0: Switch off the PTO
Press the button downwards.
Selector switch for hydraulic PTO
2
Tempomat
3
Differential lock
4
Electrical PTO, front
5
Electrical PTO, rear
6
Switchover for double-acting control hydraulics AUX
7
"rear/attachment frame with tipping function"
Main switch, floating position
8
Dump valve (quick-lowering for AUX rear)
9
Attachment release switch (optional)
10
Note
This switch is responsible both for vibration dampening
and for attachment release (both options at the same
time does not work)
Locking enabling for shovel or fork in the optional front
11
loader attachment
Switch for bypassing floating position (PTO usable with-
12
out floating position)
ATTENTION
Only use with attachments that need this function!
Hazard warning switch
13
Potentiometer - engine speed
14
Selector switch for hydraulic PTO
Hydraulic PTO (100 l/min, front) activated
1
Hydraulic PTO (50 l/min, front) activated
2
Hydraulic PTO (50 l/min, front) and (50 l/min, rear) acti-
3
vated
Hydraulic PTO (50 l/min, rear) activated
4
Hydraulic PTO (100 l/min, rear) activated
5
The selector switch is used to activate the relevant con-
nection for the front and rear hydraulic PTO.

6.11.4Rear operating console for MIC 50

Rotary knob for front power lift lowering speed
1
Rotary knob for attachment release (optional)
2
Ignition lock
3
Additional socket-outlet, 12 V
4
English 67