Turning Off The Power - Denso BHT-800 Series Operator's Manual

Turning OFF the Power

You can turn off the BHT in one of the following three methods.
Method 1: Normal power OFF
Press the Power key.
The BHT turns OFF after the message on the screen
given to the right displays.
Point
Do not remove the battery cartridge while the message
on the right is displayed.
Otherwise, a message requesting you to contact the
administrator may appear when the power is turned ON
next time.
Method 2: Turning the power OFF after data back-up
Hold down the Power key for at least 3 seconds.
The message shown on the right appears and data
back-up is commenced.
The power turns OFF automatically when the back-up is
complete.
Point
Do not remove the battery cartridge while the message
on the right is displayed.
The back-up process may take several tens of seconds
depending on the amount of data.
Method 3: Auto power OFF
The power turns OFF itself when the BHT is not used for the specified period of time set at the user
program. This is set to 3 minutes at default when the BHT is shipped from the factory.
* Refer to the Programmer's Manual for further details of auto power OFF.
-11-