Graco Therm-O-Flow 200 Instructions Manual page 85

Local Network Connection
Hardware and Software Configuration
Hardware
Patch cables are used to connect each TOF 200 unit to
the local network and to the Web connection (A) on the
EasyKey panel. See F
IG
A
ti8557
F . 31 EasyKey Web Connection
IG
Microsoft Browser Configuration
8. Establish a connection/address to the local network.
a. Open the PC control panel.
b. Select Network Connections.
c. Double click on the local area connection.
d. Select Properties.
e. Select Internet Protocol (TCP/IP).
f. Select Properties.
g. Select the appropriate Internet connection and
key in address 192.168.0.10
311208P
. 31
9. The TOF 200 EasyKey software requires Sun java
to operate. Open your web browser options
advanced tab and select Java (Sun) and deselect
the Microsoft VM selection. See F
Java option is not available follow the Software
Operation procedure and load the Sun Java pro-
gram when the appropriate screen and link appear.
Browser must be closed and restarted for change
to be effective.
Use smooth scrolling
HTTP 1.1 settings
Use HTTP 1.1
Use HTTP 1.1 through proxy connections
Java (Sun)
Use Java 2 v1.4.2_09 for <applet> (requires restart)
Microsoft VM
Java console enabled (requires restart)
Java logging enabled
JIT compiler for virtual machine enabled (requires restart)
F . 32 Java Internet Options
IG
It may be necessary to change the Java selection
from Sun to Microsoft for other software applications to
run correctly on your PC.
If you cannot make these changes contact your I.S.
department and request they change your computer
access rights. You must have administrative rights to
change the settings.
Advanced Units
. 32. If the Sun
IG
85