Plus+1® Connect Portal; Problem With Connection To Plus+1® Connect Portal - Danfoss PLUS+1 Connect CS100 Technical Information

Technical Information
PLUS+1 Connect CS100 IoT Gateway — Professional Install Only
PLUS+1® Connect portal
Problem with connection to PLUS+1® Connect portal
20 | © Danfoss | October 2020
The CS100 is produced with a pre-installed SIM card and with a default configuration that allows the
direct connection of the device to the PLUS+1
The visibility of the device on the PLUS+1
activated with a specific data plan the device is not visible on the portal.
Connect the device and ensure the device turns on.
The LED light correct sequence:
•
The LED lights up green constantly during the first second.
•
The LED starts to flash.
After connecting to power supply, the LED should then follow the correct sequence. If the LED lights up
green and becomes red or stops during one of the steps, there is a problem. Contact the helpdesk or your
CS PAE. EID number is required in order to help you.
® Connect portal.
Connect portal is linked to the activation of the device, if not
®
BC299456869228en-000101