Table of Contents
Advertisement
II. EASYGRIP BREAKAWAY RECONNECTION CLAMP
TOOLS NEEDED:
•
EasyGrip Reconnection Clamp
•
8 mm Hex Head Socket
•
Torque wrench
•
Safety Glasses
RECONNECTION PROCEDURE
NOTE: Additional information on the EasyGrip operation can be found by viewing a video clip on
their website at
1.
Inspect each half of the separated breakaway for obvious damage to the outer-shell, plastic
inserts or o-rings; including cracks, chips or tears that may effect reconnecting the two halves.
2.
Check the shear pin bushing hole, (See Figure 1) located in the top half of the breakaway for
any part of the pin left behind at separation. A gentle tap on the opposite side of the breakaway
should eject the pin.
http://www.simplegrip123.com/
Figure 1
CARB Approved IOM 6 - Healy Breakaway Model 8701VV - Executive Orders VR-201 and VR-202
6-4
Advertisement
Table of Contents
Need help?
Do you have a question about the Healy 8701VV and is the answer not in the manual?
Questions and answers