Push Floor Screw Conveyor, D = 250 Mm; Push Floor Screw Conveyor Drive, Standard; Drive, Push Floor Screw Conveyor, High Power; Push Floor Screw Conveyor Cover - Viessmann VITOFLEX 300-UF Technical Manual

Fuel discharge

Push floor screw conveyor, D = 250 mm

For part no., see pricelist
In order to remove the fuel discharged by the pushrods, the push
floor screw conveyor extends over the entire push floor width as an
open trough screw conveyor. For further transportation, the push
floor screw conveyor is designed, depending on the transfer situa-
tion, as a sealed trough or a pipe.

Push floor screw conveyor drive, standard

For part no., see pricelist
Standard version for the push floor screw conveyor with pulling drive
and discharge into a drop section. The system is driven by a spur
geared motor and chain with a dust-proof chain guard.
Standard push floor screw conveyor drive
Screw conveyor torque
Push floor screw conveyor
Push floor screw conveyor, function
Push floor screw conveyor, max. length
Max. boiler output with woodchips

Drive, push floor screw conveyor, high power

For part no., see pricelist
Special powerful version of the push floor screw conveyor for more
difficult applications (high pump rate and/or pushing function).
The following are reinforced:
■ Spur geared motor
■ Bearings
■ Chain with dust-proof chain guard
5
Push floor screw conveyor drive, high power
Screw conveyor torque
Push floor screw conveyor
Push floor screw conveyor, function
Push floor screw conveyor, max. length
Max. boiler output with woodchips

Push floor screw conveyor cover

For part no., see pricelist
Cover for:
■ Open trough of the push floor screw conveyor
■ Open slot of the fuel store
The cover is mounted on the front panel of the fuel store. It is
opened via a hinge and serves as a touch guard for maintenance
personnel.
Viesmann
64
(cont.)
Standard delivery:
■ Push floor screw conveyor as per project drawing
Note
Article price per m
Standard delivery:
■ Drive unit with spur geared motor 400 V and chain drive
■ Light barrier across the entire open area for monitoring the fill level
(overfill protection)
■ Discharge with inspection cover, safety limit switch and drop chute/
adaptor for the following conveyor device (not required in pushing
version)
Standard delivery:
■ Drive unit in a robust design with additional axial bearing for push-
ing function with spur geared motor 400 V and chain drive
– Matching and switching on a project-specific basis
■ Light barrier across the entire open area for monitoring the fill level
(overfill protection)
■ Discharge with inspection cover, safety limit switch and drop chute/
adaptor for the following conveyor device (not required in pushing
version)
Nm approx. 1200
Type AQ-L190
Pulling
m 10
kW 1500
Standard delivery:
■ Cover of the push floor screw conveyor with wall mounting support
and hinge as per project drawing
■ Limit switch for emergency stop of the push floor and the push
floor screw conveyor when opening the cover
Note
Article price per m
Total price = fuel store width in m x article price
Nm approx. 800
Type AQ-L190
Pulling
m
kW 1250
approx. 1200 approx. 1200
AQ-L250 AQ-L250
Pushing Pulling
8
2500 2500
VITOFLEX 300-UF
10
10