Fall Protection Grille 120 For Fdb; Fall Protection Grille 200 For Fdb; Shaker Motor For Fall Protection Grille; Hydraulic Unit For Bunker Charging Cover - Viessmann VITOFLEX 300-UF Technical Manual

Fuel storage
(cont.)
Specification
FDB drive-over bunker cover
a
b
c
d
e
f
FDB cover weight
Max. permissible axle load

Fall protection grille 120 for FDB

For part no., see pricelist
Fall protection grille (in multiple elements) to prevent anyone falling
when the cover is open. Matching corresponding fuel store cover.
Each element is prepared for installation of a shaker motor (shaker
motor at an additional charge).
Max. load 200 kg/m 2
Specification
Fall protection grille, type 120 for
Number of elements
Weight per pce

Fall protection grille 200 for FDB

For part no., see pricelist
Fall protection grille (in multiple elements) to prevent anyone falling
when the cover is open. Matching corresponding fuel store cover.
Each element is prepared for installation of a shaker motor (shaker
motor at an additional charge).
2
Max. load 200 kg/m
Specification
Fall protection grille, type 200 for
Number of elements
Weight per pce

Shaker motor for fall protection grille

For part no., see pricelist
The shaker motor sets the fall protection grille in an oscillating
motion. This prevents the delivered fuel from bridging the fall protec-
tion grille and therefore ensures a steady material flow during filling.
Standard delivery:
■ Shaker motor, 3 x 400 V incl. control, thermal relay and installation
material
■ Key switch

Hydraulic unit for bunker charging cover

7
For part no., see pricelist
Hydraulic unit used exclusively for a hydraulic bunker cover (FDH,
FDB). The cover is opened by the hydraulic cylinder when the key
switch is actuated. The load holding valve fixes the cover in position.
Viesmann
82
FDB 3.0/2.0
mm 3000
mm 2110
mm 2000
mm 3150
mm 2530
mm 2150
kg 1520
t 7.5
Standard delivery:
■ Support profile for installation in ceiling recess
■ Fall protection grille in several elements
■ Mesh size: 200 x 120 mm
FDB 3.0/2.0
pce 2
kg 130
Standard delivery:
■ Support profile for installation in ceiling recess
■ Fall protection grille in several elements
■ Mesh size: 200 x 200 mm
FDB 3.0/2.0
pce 2
kg 120
To be carried out by the customer:
■ Electrical connection of shaker motor and key switch
Note
One shaker motor is required per fall protection grille element. When
using shaker motors, a large control panel must be included in the
plans.
FDB 3.8/2.4 FDB 3.2/3.2
3800 3200
2510 3310
2400 3200
3950 3350
2930 3730
2550 3310
2360 2680
10.0 10.0
FDB 3.8/2.4 FDB 3.2/3.2
2
205 230
FDB 3.8/2.4 FDB 3.2/3.2
2
180 210
VITOFLEX 300-UF
2
2