Operation
Boiler Control System
The control system for the Vitoflex 300-UF boiler firing
process (boiler control) is controlled by a Programmable
Logic Controller (PLC), which visualizes the system on a
touch screen and provides an interface for navigation and
entering settings.
Export of operational data via Mod-bus boiler control
As an option, the boiler control unit can be extended with
the Mod-bus (PYR-SED) extension module. This extension
module enables the exchange of operating data between
the higher control unit (Modbus master) and the boiler
control unit (Modbus slave) via a serial interface (RS232).
Note: This module is optional and must be ordered
separately. Please refer to the export of Operational
data via Mod-bus boiler control for details.
50
Vitoflex 300-UF Installation & Operating
The soft touch keys in Screen 1
Switch on boiler
When touched, the color changes
(from light to dark)
Soft touch key 1
Switch off boiler
When touched, a confirmation is
requested, and then the color
changes (from light to dark).
Soft touch key 2
Lock screen / Unlock screen
When touched, a confirmation
is requested.
Soft touch key 3
Open settings
Touching it opens Screen 4 to
enter settings.
Soft touch key 4
Overview, wood-fired boiler
Touching it opens Screen 7.
Soft touch key 7
Screen for Vitoflex 300-UF boiler
Overview, additional boilers
Touching it opens Screen 8.
Important: Screen 8 is only available
with optional multiple-boiler systems.
Soft touch key 8
An additional boiler can be manually
Symbol
switched on or off, and automatic
operation can be selected. The
operating hours counter is located
in the centre left of the screen.