Protective Panel Ah For The Fuel Store Wall; Cover Panel Ah For Wood Pellets - Viessmann VITOFLEX 300-UF Technical Manual

Fuel discharge
(cont.)

Protective panel AH for the fuel store wall

For part no., see pricelist
Metal cover to protect the fuel store wall from damage by the agitator
arms. The protective panel is attached to the straight internal fuel
store wall.

Cover panel AH for wood pellets

For part no., see pricelist
Metal cover of the open screw conveyor area to reduce the inlet
cross-section
Note
When changing the fuel, observe the following:
■ Changeover from wood pellets to woodchips:
remove the cover panels above the discharge screw conveyor
before filling the fuel store with woodchips.
■ Changeover from woodchips to pellets:
install the cover panels above the discharge screw conveyor
before filling the fuel store with wood pellets.
VITOFLEX 300-UF
Standard delivery:
■ 2 - 4 protective panels, painted, dimensions 1000 x 250 x 4 mm
■ Rawl plugs and screws
Standard delivery
■ Cover panel, painted
Length and number matched to the project
■ Screws
5
Viesmann
51