10
Important Notes
Pos : 15.8 /Serie 852 (ETH ERNET-Zubehör)/Wic htige Erl äuter ungen/N or men und Richtlinien 852- xxxx - Ü bersc hrift 2 und Inhalt @ 3\mod_1222346239453_21.doc x @ 22261 @ 3 @ 1
2.1.5
Standards and Regulations for Operating the Industrial
Switches
Please observe the standards and regulations that are relevant to installation:
•
The data and power lines must be connected and installed in compliance
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
•
For installation, startup, maintenance and repair, please observe the accident
prevention regulations of your machine (e.g., BGV A 3, "Electrical
Installations and Equipment").
•
Emergency stop functions and equipment must not be deactivated or
otherwise made ineffective. See relevant standards (e.g., DIN EN 418).
•
Your installation must be equipped in accordance to the EMC guidelines so
electromagnetic interferences can be eliminated.
•
Please observe the safety measures against electrostatic discharge according
to DIN EN 61340-5-1/-3. When handling the modules, ensure that
environmental factors (persons, workplace and packing) are well grounded.
•
The relevant valid and applicable standards and guidelines regarding the
installation of switch cabinets must be observed.
Pos : 15.9 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-ETHERNET-Zubehör 852
852-1112 8-Port 1000BASE-T-Industrial-Eco-Switch
Version 1.1.0FW/HW-Version 01/01
Manual