Standards And Regulations For Operating The Industrial Switches - WAGO ETHERNET Accessories 852 852-0111 Mounting, Installation And Handling Manual

WAGO ETHERNET Accessories 852
852-0111 5 Port 100BASE-TX Industrial ECO Switch
2.1.5 Standards and Regulations for Operating the Industrial
Switches
Please observe the standards and regulations that are relevant to installation:
• The data and power lines must be connected and installed in compliance
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
• For installation, startup, maintenance and repair, please observe the
accident prevention regulations of your machine (e.g., DGUV Regulation
"Electrical Installations and Equipment").
• Emergency stop functions and equipment must not be deactivated or
otherwise made ineffective. See relevant standards (e.g., DIN EN 418).
• Your installation must be equipped in accordance to the EMC guidelines so
electromagnetic interferences can be eliminated.
• Please observe the safety measures against electrostatic discharge
according to DIN EN 61340-5-1/-3. When handling the modules, ensure
that environmental factors (persons, workplace and packing) are well
grounded.
• The relevant valid and applicable standards and guidelines regarding the
installation of switch cabinets must be observed.
Version 1.2.0, valid from FW/HW Version 01/06
List of Figures 11
Manual