Advertisement
Quick Links
Hallingford - 4 Door 3 Drawer Wardrobe
Assembly Instructions
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 6400800
- Please keep for future reference
Dimensions
Width - 197,9cm
Depth - 60,3cm
Height -205,7cm
Tip : To prevent damage,
we recommend that you
build your unit on the
carton(s) it was packed in.
305/2763
305/2804
305/2794
305/2770
305/2787
Issue 1 - 24/05/13
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos Hallingford 305/2763
Summary of Contents for Argos Hallingford 305/2763
- Page 1 Hallingford - 4 Door 3 Drawer Wardrobe Assembly Instructions 305/2763 - Please keep for future reference 305/2804 305/2794 305/2770 305/2787 Tip : To prevent damage, we recommend that you build your unit on the carton(s) it was packed in. Dimensions Width - 197,9cm Depth - 60,3cm Height -205,7cm...
- Page 2 Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • Do not stand or put weight on • We do not components and tools listed on the product, this could cause recommend the pages 2 and 3.
- Page 3 Components - Panels Please check you have all the panels listed below Left mirror door x1 Right mirror door x1 Left side Right side Upright x2 (151.2 x 48.8cm) (151.2 x 48.8cm) (205.6 x 58cm) (205.6 x 58cm) (196.9 x 57.6cm) PS3323 PS3324 P2349b...
- Page 4 Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0845 6400800 Please check you have all the ttings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more FK1324 FK1980 FK1981...
- Page 5 Assembly Instructions Step 1 Drawer assembly x 3 Insert two small locking nuts into drawer wrap Make sure the ‘arrow’ on is pointing towards the hole in the edge of Screw 24mm locking screws into holes shown on back of drawer front Make sure 24mm locking screws are tightened...
- Page 6 Assembly Instructions Step 1 - continued Turn the drawer wrap assembly over and push onto drawer front . Use a philips or atblade screwdriver, that is a good t, to turn small locking nut as far as it will go - more than 1/2 turn. Fix drawer handle onto drawer front using...
- Page 7 Assembly Instructions Step 2 - Step 2 - continued continued Slide top of runners Slide top of runners back. back. Fix through 3rd hole of Fix through 3rd hole of runner runner and pre-drilled and pre-drilled holes of upright holes of upright using using 10mm xing screw drawer...
- Page 8 Assembly Instructions Step 4 Attaching panels Position large horizontal onto upright Insert two large locking nuts into large horizontal as shown. Use a screwdriver to turn locking nuts clockwise to lock. Step 5 Attaching panels Position large horizontal onto upright Insert two large locking nuts into large horizontal as shown.
- Page 9 Assembly Instructions Step 7 Attaching plinths Align the sides of plinth front with bottom shown and attach using 40mm screw Note: there are no predrilled holes for 40mm screw Note: top and bottom panels are identical. Only prepare one of the Finished panels at this stage.
- Page 10 Assembly Instructions Step 10 Attaching panels Position small horizontals onto uprights Insert three large locking nuts into small horizontals as shown. Use a screwdriver to turn locking nuts clockwise to lock. Step 11 Insert ttings Screw 24mm locking screw into left side and right side Note: Insert 24mm locking screw...
- Page 11 Assembly Instructions Step 13 Fitting back panels Attach back and foldy back to back of wardrobe with the coloured surface facing the inside of the unit using nails and 15mm screws Use nail holder to hold the nails vertical and at correct distance as you secure the back and foldy back...
- Page 12 Assembly Instructions Step 15 Inserting drawers Pull runners out. Slide drawers onto runners so they butt up against back of drawer front. Fix through drawer sides into runners using 9mm screws 1st small threaded hole Step 16 Fitting hinges & door handles to doors Fix three hinge doors each door...
- Page 13 Assembly Instructions Step 17 Hanging doors & attaching L-bracket With help, slot hinge door onto hinge back Tighten screw shown to lock hinges in position. Repeat a and b for other doors. See ‘Hinge adjustment’ in step 20 if the doors need adjusting.
- Page 14 Assembly Instructions Step 18 Hinge adjustment To move doors up or down: loosen screws shown and move doors to suit. Once doors are aligned, re-tighten. To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws. To move doors left or right: loosen screw shown and move doors...
-
Page 15: Maintenance
Important: When drilling into walls always check that there are no hidden wires or pipes etc. If plastic wall plugs Make sure that the screws and wall plugs being used are supplied with your are suitable for supporting your unit. Consult a qualified product: tradesperson if you are unsure.
Need help?
Do you have a question about the Hallingford 305/2763 and is the answer not in the manual?
Questions and answers