Advertisement
Quick Links
Marlow Six Drawer-Wide
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
bolt
locking
dowel
x40
nut x40
x12
I
J
H
L + R slide
screw
x8
rail x6
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
F
D
E
long
small
screw
screw
x38
screw
x60
x6
K
L
M
nut
felt pad
bolt
x4
x4
x4
Hardware Supplied
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
* We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
V
G
safety
wedge
strap x2
x8
N
adjuster
x1
W
X
Y
screw
wall
wall
washer
x2
anchor
screw
x2
x2
Wall Strap
Z
x4
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Marlow Six Drawer-Wide
Summary of Contents for Mocka Marlow Six Drawer-Wide
- Page 1 * We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Attach 3x slide rails (I) to panel [2] and 3x slide rails (J) to panel [3] Tighten with a screwdriver. secure with 18x small screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Tighten with a screwdriver. Flip panels [5] over, attach 3x slide rails (J) to the other side of panel [5], and secure with 9x small screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 4 Attach panel [1] to the unit with 4x dowels (C) and secure with 4x [3] and [6] to form the back of the unit as shown. locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 5 (B). Tighten with a screwdriver. a screwdriver. Slide panels [7] down along the grooves between the panels [2], [3] and [6] to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 6 Tighten with a screwdriver. Apply 4x felt pads (M) to panels into panel [4] and turn until firm. Insert the adjuster (N) into the [9] as shown. support leg [17] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 7 Attach panels [8] and [9] to panel [4] and secure with 6x long screws (D). Insert 5x bolts (A) into panels [10]/[16]. Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 8 Attach panels [11], [12] and [13] to panel [10]/[16] and secure with 5x locking Slide panel [14] along the grooves between the panels [11] and [12] to nuts (B). Tighten with a screwdriver. form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 9 Attach slide rails (I) to panel [11] and slide rails (J) to panel [12] and secure Tighten with a screwdriver. with 4x small screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 10 8x screws (H). Attach 2x safety strap (V) to the top of the back side of the unit as shown using 2x washer (Z) and 2x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 11 (V). Fasten to the wall using 2x washer (Z), 2x wall anchor (X) and 2x wall screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Marlow Six Drawer-Wide and is the answer not in the manual?
Questions and answers