Table 4-12 Model Number - Prodigit 3302F Mainframe Operation Manual

60 PRODIGIT
[SYStem：] *RST
Command Syntax:
[SYStem：] *RST {；NL}
Purpose: 330XF Mainframe reset.
Description: This command is 330XF Mainframe reset.
[SYStem：] REMOTE
Command Syntax:
[SYStem：] REMOTE {；NL}
Purpose: Command to enter REMOTE status (only for RS232)
Description: This command is for enabling control of the unit via RS232.
[SYStem：] LOCAL
Command Syntax:
[SYStem：] LOCAL {；NL}
Purpose: Command to exit the REMOTE status (only for RS232)
Description: This command closes the RS232 control interface.
4.6.5. MEASUREMENTS – This set of commands allows the programmer to measure
The actual voltage at the load terminals and the current being taken.
MEASure：CURRent？
Command Syntax:
MEASure：CURRent？{；NL}
Purpose: Measures the load current.
Description: Reads the current meter. The engineering unit is Ampere (A)
MEASure：VOLtage？
Command Syntax:
MEASure：VOLtage ?{；NL}
Purpose: Measures the load voltage.
Description: Reads the voltmeter. The engineering unit is Voltage (V)
MEASure：POWer？
Command Syntax:
MEASure：POWer?{；NL}
Purpose: Read the power being taken by the load.
Description: Reads the power meter. The engineering unit is Watt (W)
MODEL
3310F 3330F
3311F 3332F
3312F 3336F
3314F
3315F

TABLE 4-12 MODEL NUMBER

3340F/G 33401F/G
3341F/G
3342F/G
3343G