Table of Contents
Advertisement
Chapter 2 Installation
2.1 Inspection
The 3302F mainframe was carefully inspected, tested and calibrated before shipment. If
damage to the instrument has occurred during transport, please inform Prodigit's sales and
service office or representative. Your 3302F mainframe was shipped with a power cord for the
type of outlet used at your location. If the appropriated cord was not included, please contact
your nearest sales office to obtain the correct cord. Refer to "check line voltage" to check the
line voltage selection and fuse type.
2.2 Check line voltage
The 3302F mainframe can be operated from a 100/115 or 200/230Vac input as indicated on
the label on the rear panel. The input is switchable so please make sure that the switch is set
correctly for your nominal mains input before turning on the mains power. The procedure
below details how to change the switch position:
2.2.1
2.2.2
With the 3302F mainframe power OFF, disconnect the power cord.
Refer the drawing on the rear panel in Fig 2-1, set the switches to the
Proper voltage as described in the following:
a. Set Switch to 100V/115V for 115Vac line voltage
b. Set Switch to 200V/230V for 230Vac
Note: 100Vac and 200Vac is used for Japan only (Option)
Fig 2-1 SET OF SWITCH
3302F Mainframe Operation Manual 3
Hide quick links:
Advertisement
Table of Contents
