Gpib Connection Option; Usb Connection Option; Lan Connection Option; Fig 2-5 3302F Rear Panel - Prodigit 3302F Mainframe Operation Manual

2.11 GPIB connection option

The GPIB connector is located on the rear panel. This socket allows the 3302F to be
connected to the controller and other GPIB devices. A GPIB system can be connected in any
configuration (star, linear, or both) as long as
•
•
•
•

2.12 USB Connection Option

Fig 2-6 shows the USB connector in the rear panel of 3302F mainframe. Please refer
Appendix B.

2.13 LAN Connection Option

Fig 2-7 shows the LAN connector in the rear panel of 3302F mainframe. Please refer
Appendix C.
The maximum number of devices including the controller is ≤15.
The maximum length of the GPIB cable is no more than 2 meters times.
The total lead length of all devices connected together total <20 meters.
Please make sure the lock screws are firmly hand-tightened, use a
Screwdriver only for the removal of screws. Fig 2-5 shows the rear
Panel of 3302F mainframe, The GPIB address of the 3302F mainframe is
Set on front panel.

Fig 2-5 3302F REAR PANEL

Fig 2-6 3302F USB Connection

Fig 2-7 3302F LAN Connection

3302F Mainframe Operation Manual 7