Table 4-8B Auto Sequence Command List - Prodigit 3302F Mainframe Operation Manual

44 PRODIGIT
REMARK:
1. Frequency engineering unit: Hz
2. GLOB: GLOBAL ( all channels active in same time ) .
3. Current engineering unit: A
4. Voltage engineering unit: V
5. Resistance engineering unit: Ω
6. Period engineering unit: ms
7. Slew-rate engineering unit: A/us or mA/us
8. Power engineering unit: W
9. *9 CR DYN function version of the following
AUTO SEQUENCE: AVILABLE FOR ALL MODULES
AUTO SEQUENCE COMMAND
FILE {SP} {n}{； NL}
STEP {SP} {n} {；NL}
TOTSTEP {SP} {n}{；NL}
SB {SP} {m,n} {；NL}
T1 {SP} {NR2} {；NL}
T2 {SP} {NR2} {；NL}
SAVE {；NL}
REPEAT {SP} {n} {；NL}
RUN {SP} {F} {n} {；NL}
a. 3302F at r2.15 version above is enabled.
b. 3310F at r1.11 version above is enabled.
c. 3311F at r1.11 version above is enabled.
d. 3312F at r1.11 version above is enabled.
e. 3314F at r1.11 version above is enabled.
f. 3315F at r1.11 version above is enabled.

TABLE 4-8B AUTO SEQUENCE COMMAND LIST

NOTE
n=1~9
n=1~16
Total step n=1~16
m=1~10 n=1~15
m:STATE , n:BANK
0.1~9.9(s)
0.1~9.9(s)
Save "File n" data
n=0~9999
n=1~9
RETURN
1~9
1~16
1~16
0.1~9.9(sec)
0.1~9.9(sec)
0~9999
AUTO REPLY
"PASS" or "FAIL:XX"
(XX=NG STEP)