Checking The Software Status; Removing Jammed Paper; Paper Does Not Feed Correctly - Epson WF-2860 Series User Manual

User's Guide
3. Click EPSON Status Monitor.
You can check the printer status, ink levels, and error status.

Checking the Software Status

You may be able to clear the problem by updating the software to the latest version. To check the software status,
use the software update tool.
Related Information
"Software Update Tools (EPSON Software Updater)" on page 174
&
"Installing the Latest Applications" on page 175
&

Removing Jammed Paper

Follow the on-screen instructions on the printer's control panel to locate and remove the jammed paper including
any torn pieces. The LCD screen displays an animation that shows you how to remove jammed paper.
Caution:
!
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
Important:
c
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.

Paper Does Not Feed Correctly

Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a flat surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Do not load more than the maximum number of sheets specified for the paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
❏ Clean the roller inside the printer.
Related Information
"Environmental Specifications" on page 217
&
"Paper Handling Precautions" on page 44
&
"Available Paper and Capacities" on page 43
&
Solving Problems
182