Fault Tracing; Leds - ABB Fimer PVS980-58 Series Commissioning And Maintenance Manual

Fault tracing

This chapter describes the fault tracing of the inverter.

LEDs

The table identifies the location, name, color and meaning of the LED indicators in the
inverter.
Where LED
Inverter main status Operating
panel (outer control
Warning
cabinet door)
Fault
Heating
Control panel Status LED
(ACS-AP-I)
Color Indication
Green The inverter operates normally.
Orange There is an active warning in the inverter.
Red There is an active fault in the inverter.
Blue The internal heater is on. Inverter auxiliary power is
disabled until the heating process is done.
Green, The inverter operates normally and the control unit
continuous is on.
Green, Data is transferred between the PC tool and the
flickering inverter via USB.
Green, There is an active warning in the inverter.
blinking
Red There is an active fault in the inverter.
4
Fault tracing 21