Saving A Sound (Write); Saving A Patch (Patch Write); Exchanging Patches (Patch Exchange) - Boss GT-1000CORE Parameter Manual

Saving a Sound (WRITE)

Saving a Patch (PATCH WRITE)

When you want to save a patch you have created, save it as a user
patch by following the procedure below. If you do not save the patch,
the edited settings will be lost when you turn off the power or switch
to another patch.
1
Press the [WRITE] button.
2
Press knob [1] to select "WRITE" (PATCH WRITE).
3
Use knob [1] to select the save-destination (U001–
U250).
You can use knobs [3]–[5] and [SELECT] knob to edit the name.
Editing a name
To edit the patch name, use knob [SELECT] to move the cursor
and use knob [5] to change the character.
Controller
Turn the [3] knob
Press the [3] knob
Turn the [4] knob
Press the [4] knob
Turn the [5] knob
Turn the [SELECT] knob
4
Press the [WRITE] button once again.
The patch is written.
56
Operation
Selects the type of characters
Delete one character (delete)
Switch uppercase/lowercase
Insert one space (insert)
Changes the character
Moves the cursor

Exchanging Patches (PATCH EXCHANGE)

On the GT-1000CORE, you can "swap" or exchange the positions of
two User patches.
1
Select the exchange source patch.
2
Press the [WRITE] button.
3
Press knob [2] to select "EXCHANGE" (PATCH
EXCHANGE).
4
Use knob [1] to select the other user patch that you
want to exchange.
* If you decide to cancel without exchanging, press the [EXIT]
button a several times. You'll be returned to the Play screen.
5
Press the [WRITE] button once again.
A confirmation message appears.
6
Press the [5] knob.
The patches will be exchanged. If you decide to cancel the
exchange operation, press knob [4].