Humanizr (Humanizer); Octave; Oct Bass (Octave Bass); Overtone - Boss GT-1000CORE Parameter Manual

Effect

HUMANIZR (HUMANIZER)

This can create human vowel-like sounds.
Parameter Value
This sets the mode that switches the vowels.
PICKING
MODE
AUTO
VOWEL 1
a, e, i, o, u
VOWEL 2 a, e, i, o, u
SENS *1
0–100
0–100,
RATE
BPM ΠР`
DEPTH 0–100
MANUAL *2 0–100
LEVEL 0–100
BPM 40–250
*1 Setting available when MODE is set to PICKING.
*2 Setting available when MODE is set to AUTO.
20
Explanation
It changes from VOWEL 1 to VOWEL 2 along
with the picking. The time spent for the
change is adjusted with the rate.
By adjusting the rate and depth, two vowels
(VOWEL 1 and VOWEL 2) can be switched
automatically.
Selects the first vowel.
Selects the second vowel.
Adjusts the sensitivity of the humanizer.
When it is set to a lower value, no effect
of the humanizer is obtained with weaker
picking, while stronger picking produces
the effect. When it is set to a higher value,
the effect of the humanizer can be obtained
whether the picking is weak or strong.
Adjusts the cycle for changing the two
vowels.
* When set to BPM, the value of each
parameter will be set according to the
value of the "MASTER BPM" specified for
each patch. This makes it easier to achieve
effect sound settings that match the
tempo of the song.
* If, due to the tempo, the time is longer
than the range of allowable settings, it is
then synchronized to a period either 1/2
or 1/4 of that time.
Adjusts the depth of the effect.
This determines the point where the two
vowels are switched. When it is set to 50,
VOWEL 1 and VOWEL 2 are switched in the
same length of time. When it is set to lower
than 50, the time for VOWEL 1 is shorter.
When it is set to higher than 50, the time for
VOWEL 1 is longer.
Adjusts the tone.
Adjusts the BPM value for each patch.
* BPM (beats per minute) indicates the
number of quarter note beats that occur
each minute
* When you have an external MIDI
device connected, the MASTER BPM
synchronizes to the external MIDI devices
tempo, making it impossible to set the
MASTER BPM. To enable setting of the
MASTER BPM, set "SYNC CLOCK" (p. 47) to
"INTERNAL. "

OCTAVE

This adds a note one octave lower and a note two octaves lower,
creating a richer sound.
Parameter Value
MONO
TYPE
POLY
-2OCT *1
0–100
-1OCT *1 0–100
D.LEVEL 0–100
RANGE *2 0–100
OC.LEVEL *2 0–100
*1 Setting available when TYPE is set to MONO.
*2 Setting available when TYPE is set to POLY.

OCT BASS (OCTAVE BASS)

This is an OCTAVE effect for bass.
Parameter Value
-2OCT 0–100
-1OCT
0–100
D.LEVEL
0–100

OVERTONE

This effect uses MDP technology to add new harmonics to the sound,
producing resonance and richness that was not present in the original
sound.
Parameter Value Explanation
Adjusts the volume of the harmonic one octave
LOWER 0–100
below.
Adjusts the volume of the harmonic one octave
UPPER 0–100
above.
Adjusts the volume of added sound whose pitch
UNISON 0–100
is slightly shifted relative to the direct sound.
D.LEVEL 0–100 Adjusts the volume of the direct sound.
Adjusts the amount of the detune effect that
DETUNE 0–100
adds depth to the sound.
Adjusts the tonal character of the low-frequency
LO
-50–+50
range.
Adjusts the tonal character of the high-frequency
HI
-50–+50
range.
MONO,
OUTPUT Selects the type of output.
STEREO
Explanation
Adds a note one octave lower and a note two
octaves lower than the input.
This supports mono input.
Adds a note one octave lower than the input.
This supports polyphonic input.
Adjusts the volume of the sound two octave
below.
Adjusts the volume of the sound one octaves
below.
Adjusts the volume of the direct sound.
This selects the register to which the effect
is applied.
Adjusts the volume of the sound one octave
below.
Explanation
Adjusts the volume of the sound two octave
below.
Adjusts the volume of the sound one octaves
below.
Adjusts the volume of the direct sound.