Table of Contents
Advertisement
Storing the Tones You Create — The Write Procedure
When you want to keep tones created using EZ Tones and
| 3.
Press [WRITE] once more.
Quick Edit, as well as other tones that have been changed,
i
The text "WRITE" flashes in the LCD screen's character
use the Write procedure ta store them to the User patches.
i
display area, and the tone is saved to the selected User
* If the Write procedure is not carried out, then the tone you
patch.
have created is erased when the power is turned off or when
you switch to a different tone (Patch Change: p. 11).
The tone stored in the patch designated as the save destination
will be replaced by the new tone once the Write procedure is
executed.
1. Press [WRITE].
The characters "WRITE->" flash in the LCD screen's
character display area, and the current bank and number
are shown in the Bank display and by the Pedal Number
indicator.
2.
Select the User patch to be used as the save destination.
This procedure is not required if you want to use the current
User patch.
@
Press [GROUP SELECT] to select the group (USER 1 or
USER 2).
Press the BANK ¥ or BANK & pedal to select the bank.
Press a number pedal (1-3) to select the number.
* To stop the Write procedure, press [EXIT]. This cancels the
Write procedure.
15
Advertisement
Table of Contents
