Virtual Expression Pedal (Internal Pedal / Wave Pedal); Input (Input Level); Input Sens (Input Sens) - Boss GT-1000CORE Parameter Manual

MENU
Virtual Expression Pedal (Internal Pedal / Wave
Pedal)
By assigning a desired parameter to the virtual expression pedal,
you can produce an effect as though you were operating a physical
expression pedal to change the volume or tone quality in real time.
The virtual expression pedal system provides the following two types
of functions, and you can use the SOURCE setting for ASSIGN 1–16 to
choose the desired type.
Internal pedal
If SOURCE is set to "INT PEDAL, " the virtual expression pedal will begin
operating when started by the specified trigger (TRIGGER), modifying
the parameter specified by "TARGET. "
The value changes in
a curve
When the trigger occurs
Wave pedal
If SOURCE is set to "WAVE PEDAL, " the virtual expression pedal will
cyclically modify the parameter specified by TARGET in a fixed wave
form.
Always changes in a fixed curve regardless of the
actual pedal

INPUT (Input Level)

The parameter set as the target changes in response to the input level.
MEMO
If you want to adjust the input sensitivity, set the INPUT SENS.

INPUT SENS (Input Sens)

Parameter Value Explanation
This adjusts the input sensitivity when INPUT
INPUT SENS 0–100
LEVEL is selected for SOURCE.
42
About the Range of a Target's Change
The value of the parameter selected as the target changes
within the range defined by "Min" and "Max, " as set on the
GT-1000CORE.
When using an external footswitch, or other controller that acts
as an on/off switch, "Min" is selected with Off (CLOSED), and
"Max" is selected with On (OPEN).
When using an external expression pedal or other controller
that generates a consecutive change in the value, the value of
the setting changes accordingly, within the range set by the
minimum and maximum values. Also, when the target is of an
on/off type, the median value of the received data is used as the
dividing line in determining whether to switch it on or off.
When using the footswitch:
MAX
MIN
OFF
When using the expression pedal:
MAX
MIN
0
When the pedal is When the pedal is
fully raised fully advanced
When controlling the On/Off target with the expression pedal:
Value
ON
OFF
0
When the When the pedal
pedal is fully is advanced
raised halfway
* The range that can be selected changes according to the
target setting.
* When the "minimum" is set to a higher value than the
"maximum, " the change in the parameter is reversed.
* The values of settings can change if the target is changed after
the "minimum" and "maximum" settings have been made. If
you've changed the target, be sure to recheck the "minimum"
and "maximum" settings.
ON
127
Degree to Which
Expression Pedal
Is Depressed
127
When the
pedal is fully
advanced