Epson SC-T3100X Series User Manual page 9

SC-T3100x Series User's Guide
E
Paper stacker (for plain paper)
Attach to the front of the printer as shown when printing multiple sheets of plain paper continuously from the
auto sheet feeder. Printed paper stacks up in this tray after it is ejected. Remove this when printing on roll
paper or cut sheets (1 sheet).
"Installing and removing the paper stacker (for plain paper)" on page 32
U
F
Edge guide
Align these with the left and right edges of the paper loaded in the auto sheet feeder. Prevents paper from being
fed at an angle.
G
Auto Sheet Feeder
You can load multiple cut sheets of A4 to A3 paper. The loaded paper is fed automatically allowing you to print
continuously.
"Loading paper into the auto sheet feeder" on page 32
U
H
Cut sheet cover
Open when using the auto sheet feeder or when loading cut sheet paper.
"Loading Cut Sheet(1 sheet)" on page 36
U
When loading roll paper, open this cover and then open the roll paper cover.
To prevent dust from accumulating inside the printer, close the auto sheet feeder when it is not in use or when
you are not loading cut sheet paper.
I
Front cover
Open when a paper jam occurs.
Introduction
9