Epson SC-T3100X Series User Manual page 53

SC-T3100x Series User's Guide
D
Check that this printer is selected, and then set
the paper size.
There are three options available for each paper
size. For example, if you click A2, the following
three options are displayed.
❏ A2
❏ A2 (Retain Scale)
❏ A2 (Roll Paper Banner)
Normally, you should select the option without
parenthesis (A2 in the example above). Select
one of the other two options in the following
situations.
Retain Scale
In the following procedure, the PDF or image
data may be printed at a slightly reduced size
even if the output size is Same as Paper Size.
This is done to secure the necessary margins (3
mm on each side) for this printer. Select this
when you want to print at the full size without
any reduction.
Roll Paper Banner
Select to make long prints on roll paper using
banner printing software.
E
Select Printer Settings from the list and set
Output Size.
If Printer Settings is not displayed in the list,
the dedicated printer driver for this printer has
not been added. See the following and then add
the printer driver.
"How to Select the Dedicated Printer
U
Driver for This Printer" on page 55
Printing with the Printer Driver from Your Computer
To enlarge or reduce the size, select from the
pull-down menu below the Paper Size.
See the following for more details on
enlargement settings.
"Enlargements and Horizontal and
U
Vertical Banners" on page 59
F
Select Source and check the roll paper width
and media type.
Select from Roll Paper, Sheet, or Auto Sheet
Feeder. If you select a paper source for which
paper is not loaded in the printer,
53
appears.