Epson SC-T3100X Series User Manual page 40

SC-T3100x Series User's Guide
Note:
The settings are confirmed if no operations are
performed for 90 seconds on the above screen. To
change the settings later, touch the following in
order from the Home screen and then configure
the settings.
❏ For Auto Sheet Feeder
Paper Setting - Auto Sheet Feeder - Change
Paper Type/Paper Size
❏ For Cut Sheet(1 sheet)
Paper Setting - Cut Sheet(1 sheet) - Change
Paper Type/Paper Size
B
Touch Paper Type.
The following paper type selection screen
appears.
Note:
The three options other than Others display the
most recently selected paper type.
C
Select the paper type that matches the loaded
paper.
Epson Special Media
Select the same product name as the one shown
on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially
available paper types.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
Loading and Setting the Paper
D
40
To select a paper type that is not displayed on
the screen, touch Others.
Select a category and select the target paper
type. When a paper type is confirmed, the
screen returns to the one in step 1.
Note:
If you scroll downward in the category selection
screen, Custom Paper appears. To select custom
paper that has already been registered, touch
Custom Paper.
Touch Paper Size.
If you will not change the paper size, touch OK.
For Auto Sheet Feeder
For Cut Sheet(1 sheet)
Select a category and select the target paper size.