Aiphone IX Series Operation Manual page 33

3
How to use
Note
• The call is placed using the priority that was set during
programming.
• The call ring timer and the ringback tone count may vary
depending on the settings.
• When calling a VoIP Phone, this will be the shorter time of
the time set for "Call Timeout" and the call duration set on
the IP-PBX.
• The ringback tone may not be played, depending on the
settings.
• Depending on the settings, communication sounds may
play from separately installed speakers.
• A call start notification tone or message may play when the
call starts, depending on the settings.
• If the call duration set on this station elapses, the call will
automatically end. A notification tone will play
approximately 10 seconds prior to the call ending. The
notification tone may not play, depending on the settings.
• If a page with a higher priority is received from another
station while making an outgoing call or during a
communication, the outgoing call or call will be interrupted
and the station will switch to the page.
• If call recipients include a VoIP Phone configured to
automatically take the call, that VoIP Phone will answer.
Placing / Answering a Call
33