Funktionsbeschreibung Ventiltechnik Svk / Description Of Functions: Svk Valve Technology - Schmalz FMP Operating Instructions Manual

Innovative vacuum for automation, vacuum area gripping system
Table of Contents

Advertisement

Bedienungsanleitung
Operating Instructions
30.30.01.01009
3.2
Funktionsbeschreibung Ventiltechnik SVK /
Description of functions: SVK valve technology
Schritt / Step
1
2
3
4
* Bei der Ventiltechnik SW kann mit eingeschalteter
Vakuumerzeugung auf das Werkstück aufgesetzt werden.
Hinweis
Die optimale Funktionalität steht bei der Ventiltechnik SVK
zur Verfügung, wenn der Greifer horizontal eingesetzt wird.
Bei schräg gestelltem oder bei Schwenkvorgängen ist das
Abdichtverhalten auf rauen / strukturierten Werkstück-
oberflächen etwas eingeschränkt.
 Maximal zulässiger Schwenkwinkel gegenüber der
Horizontalen bei SVK: 60°
 Maximal zulässige Beschleunigung in vertikaler Richtung
bei SVK: 5m/s²
 Nachsaugen oder späteres Aufnehmen weiterer Produkte
nicht möglich!
FMP(-S)-SVK / FMP(-S)-SW
FMP(-S)-SVK / FMP(-S)-SW
Status 01.2018 / Index 4
Bezeichnung
Vakuumerzeugung ausschalten bzw. Greifer
durch Vakuumventil vom Vakuumerzeuger
trennen*
Greifer auf Werkstück aufsetzen – Dichtplatte
sollte min. 40 % zusammengedrückt werden
Vakuumerzeugung zuschalten
Werkstück mittels Vakuum anheben
J. Schmalz GmbH
Johannes-Schmalz-Str. 1
D - 72293 Glatten
Tel +49 (0) 7443 / 2403 - 0
Fax +49 (0) 7443 / 2403 - 259
www.schmalz.com
schmalz@schmalz.de
Designation
Switch off the vacuum generation or separate
the gripper from the vacuum generator using
the vacuum valve*
Place the gripper on the workpiece – the
sealing plate should be 40 % compressed
Switch on vacuum generation
Lift the workpiece using the vacuum
* Grippers with valve technology SW can be placed on the
workpiece when vacuum generation is switched on.
Note
The valve technology SVK functions optimally when the
gripper is used horizontally. For swiveling operations or
movements at an incline, the sealing properties for
workpieces with rough/textured surfaces it somewhat limited.
 Maximum permitted swivel angle relative to the horizontal
for SVK: 60°
 Maximum permitted acceleration in a vertical direction for
SVK: 5 m/s²
 It is not possible to provide additional suction or pick up
other products afterward.
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fmp-sFmp-svkSw spb2Fmp-swFmp-s-svkFmp-s-sw

Table of Contents