Changing The Setup Values Using Dynamic Setup - Sony NSS-V2 Installation Manual

Multi-format media server

Hide thumbs Also See for NSS-V2:

Table of Contents

5) The Reboot and Finish options are displayed. Select

either one and click the "OK" button.

* :This process rewrites the content of Setup Table (setup.conf), and

rebooting FM reflects the values.

If you select Reboot, FM is rebooted and the changed

values are immediately reflected. If you select Finish,

reboot FM manually. The changed setup values are

reflected after FM has rebooted.

2-3-3. Changing the Setup Values using

Dynamic Setup

With the "Dynamic Setup" button, the changed values of

Setup Table can be immediately notified to IOBox.

The "Dynamic Setup" button is unavailable for some

items. For such items, the "Dynamic Setup" button is

disabled.

1) After the setup values are changed, click the "Dynamic

Setup" button with the changed item being selected.

2-12 (E)

2) Repeat step 1 for other items to change setup values.

3) When all changes are complete, click the "Put Set-

up..." button.

The content of Setup Table (setup.conf) is not changed

only by clicking the "Dynamic Setup" button.

4) The changed items are displayed in red. Confirm the

changes and click the "Update" button.