Table of Contents
Advertisement
2-5-3. Startup/Stop
Transfer Manager automatically starts up and establishes the connection with File Manager when starting
the operating system. At this time, if File Manager has not been started up due to some faults or the
connection with File Manager is disconnected, Transfer Manager waits for starting up or resuming the
connection with File Manager.
If you want to start/stop Transfer Manager in the desired timing, you can use the browser or console to do
so.
Operation from the browser
To operate from the browser, enter [http:// the IP address of the Transfer Manager Global Network] in the
address field of the browser.
Figure 8. Top screen
If you enter [http:// the IP address of the Transfer Manager Global Network], the top screen as shown in
Figure 8 appears. By clicking the "Service Setting" link on the screen, a screen as shown in Figure 9
appears.
Figure 9. Service Setting (stopped) screen
2-29 (E)
NSS-V2
Advertisement
Table of Contents
