Table of Contents
Advertisement
4. Loosen the screws at the rear side of the each adaptor,
then adjust each adaptor length to the rack depth.
(Following figure is case of left side.)
Adaptor
Portion of
the rail
n
The maximum depth of an adaptor is 750 mm.
The minimum depth of an adaptor is 595 mm.
5. Firmly lay the right and left adaptors in the rack with
the specified six screws.
(Following figure is case of left side.)
B4 x 10
4U
6. Fasten the length adjustment screws which are loos-
ened in step 4.
1-6 (E)
B4 x 6
31.75
B4 x 10
31.75
Unit : mm
7. Align the crook of the each rack bracket on the side
panels of the unit with the rail, then slide the unit
backward.
n
Each rack bracket covers the rails as shown in the
figure below.
Rack bracket
Rail
8. Fix the unit to the rack with the specified screws and
ornamental washers.
Rack
Rack angle
Ornamental
washers
RK5 x 16
Ornamental
washers
RK5 x 16
Rack bracket
Rail
Rack angle
NSS-V2
Advertisement
Table of Contents
