Start-Up; Basic Start-Up Procedures - pronovost PUMA-347AG Operator's & Parts Manual

START-UP

BASIC START-UP PROCEDURES

1) Lubricate all grease fittings with a good quality
multi-purpose grease.
2) Lubricate panel release mechanism with good
quality oil.
3) Adjust tire pressure to manufacturer's
specifications.
4) Install wheels on hubs.
5) Verify for adequate tightness of all fastening
devices. Refer to torque chart on page 20.
6) Install panels.
7) Do not forget to unlock the proper panel lock
before dumping.
- 9 -
4