Table of Contents
Advertisement
MAINTENANCE
Before performing any work under the raised
platform, always install the safety prop provided.
1) Wipe off all grease fittings with a clean cloth
before adding grease in order to avoid injecting
dirt or sand.
2) Repair or replace damaged grease fittings.
3) Lubricate all grease fittings every 20 hours of
operation.
4) Check if the hub caps are always in place.
5) Check all bolts on wheels after first 5 hours of
operation and then every 50 hours of operation.
5
6) Lubricate panel release mechanism every 20 hours
of operation.
7) Check tire pressure every 50 hours of operation,
adjust according to recommendation indicated on
the tires.
8) Open, clean and lubricate wheel bearings once a
year.
9) Check all nuts and bolts once a year. If necessary
use torque chart on page 20.
- 10 -
Advertisement
Table of Contents
